Spray foam insulation
Spray foam fills and seals in one pass, which helps on walls, rim joists and tight spots loose fill can't reach. I'll tell you plainly where it's worth the extra cost.
Professional Chico Spray Foam Insulation is an insulation contractor working in Magalia, CA. We insulate and air seal attics, walls and crawl spaces on Ridge homes, and clear out old or damaged insulation before new goes in.

Professional Chico Spray Foam Insulation insulates and air seals homes in Magalia, from the attic down to the crawl space. Most of our calls start the same way, with a room that's hot upstairs, a drafty bedroom or a power bill that keeps climbing, and I go look before I suggest anything.
Magalia sits on the Ridge north of Paradise, and we come up from Chico for attic, wall and crawl space work. On any house, the first thing I check is how many inches are already in the attic and what shape they're in, because topping up good insulation costs less than tearing out bad, and covering bad insulation just buries the problem.
Then we work in order. Our crew does the air sealing first, closing the gaps around can lights, pipes, wires and the attic hatch, so the new insulation isn't fighting a draft. We keep the eave vents clear so the attic can still breathe, and we make sure the edges get full depth instead of piling it up in the middle, where it's easy to reach.
Spray foam fills and seals in one pass, which helps on walls, rim joists and tight spots loose fill can't reach. I'll tell you plainly where it's worth the extra cost.
For a room that's hot upstairs or the bedroom over the garage, the attic is usually where to start. We seal the gaps, then bring the whole floor to an even depth.
Blown-in insulation is loose fill blown through a hose, and it's often the cheaper fix for an attic that's just thin. We keep it off the eave vents so the attic still breathes.
If you're not sure where your house is losing heat, I look at the attic, walls and crawl space together and tell you which to fix first and which can wait.
When old insulation is soaked from a past leak or full of droppings, we take it out before anything new goes in, so the smell and the damp don't stay behind.
Cold floors usually mean a bare crawl space or batts that have sagged and fallen. We check for moisture first, because insulation over a wet crawl space doesn't hold up.
Older walls are often empty or settled. We fill them through small holes, and I'll tell you up front if a wire or outlet needs an electrician before we start.
Air sealing closes the gaps around pipes, wires, fixtures and doors before insulation goes in. It's often the least expensive part of the job and the one that fixes a drafty room.
If your house has a basement, we insulate the walls or the ceiling depending on how you use the space, and we look for damp spots before we cover anything.
Closed-cell foam is a dense foam that also blocks moisture. I reach for it under floors and on walls where damp is a concern, because it won't soak up water.
Open-cell foam is softer and lighter. It fills odd framing in attics and walls, quiets noise between rooms and costs less than closed-cell where moisture isn't the issue.
For shops, offices and other buildings on the Ridge, we insulate and seal the same way we do homes, and we plan the schedule around when you're open.
A crawl space vapor barrier is a plastic sheet over the dirt that keeps ground moisture from rising into the floor. We lap and seal the seams so it stays put.
Where damp air meets a cold surface, a vapor barrier keeps moisture out of the insulation and framing. I'll tell you if your house needs one, because the wrong one can trap water.
Before any insulation goes up, we seal the attic floor at can lights, pipes, wire holes and the hatch. Skip that and the new insulation sits in a draft.
Retrofit work adds insulation to a finished house, so we work through the attic, the crawl space or small holes in the walls instead of opening things up.
Send the form and we'll reply within one business day to set a time for me to come out to your Magalia address. I look at the attic and crawl space myself and write the quote on site, free and with no obligation. If you'd rather think it over after that, that's fine.
(530) 399-1513For a Magalia address, Butte County is the office for building permits, because Magalia sits outside any city's limits. If your home is inside Paradise city limits, the Town of Paradise runs its own building services, so I ask for your address first. When a job needs a permit, the county's plan review and inspection become part of the schedule, and we handle the application and inspection for you.
The county doesn't issue business licenses for its unincorporated areas, so the license to check here is the state contractor license. State law only lets someone work unlicensed on jobs under $1,000, up from $500, and only when the work needs no permit and they have no one working for them. We're licensed and insured, and the county's Development Services office in Magalia offers building guidance if you'd like to ask yourself.
What moves the price is how big the space is, how much old insulation comes out, how many gaps need sealing and whether we use foam or loose fill. The schedule turns on the permit, if there is one, and on any repair another trade should make first. I put your number in the estimate. We do the same work in Chico and out to Orland.
I grew up on a farm where you fixed things right the first time, learned insulation on other contractors' crews and started this business in Chico in 2020. I'm the one who comes out to your house and writes the estimate. Our crew lead and installers do the work, and I check it before we call the job done.
If your roof has a leak or a wire needs an electrician, I'll tell you and wait rather than insulate over it. I'll also tell you when the cheaper option is the right one. We're an insulation contractor in Chico, CA, licensed and insured, with satisfaction guaranteed on every job. Call (530) 399-1513 to set up a visit.
A few things about Magalia change how we plan the work, from how old the house is to what happens to the insulation that comes out. Here's what I keep in mind on jobs up here.
The 2018 Camp Fire destroyed many homes across the Upper Ridge, which takes in Magalia, so we see newer houses next to older ones that came through. The newer ones usually need less from us, often just sealing at the hatch and fixtures. The older ones are where I expect thin, settled insulation and gaps that have been open for years.
In older attics and crawl spaces, I look for insulation that got wet from a past roof leak or that animals have nested in. Putting new material on top keeps the smell and the damp right where they were, so we remove it first, then seal and insulate. I'd rather show you what I found than cover it up.
Foam costs more than loose fill, but it seals air while it insulates. For most attics, sealing the gaps and topping up loose fill is the better buy. The exception is when your ductwork runs through the attic, because foam at the roofline keeps those ducts inside the insulated space, and that's usually worth paying for.
The fire department suspended burn permits for residential dooryard burning, the backyard burn piles, across Butte County starting June 15, 2026, and burning stays suspended until further notice. That rules out burning the old insulation, cardboard or scraps a job leaves behind. We bag what we tear out and haul it away with the rest of the job debris, so nothing is left in your yard.
It costs the least when the attic is clean and just needs sealing and a top-up, and the most when old material has to come out first or you choose foam. A big crawl space or a lot of gaps around lights and pipes adds to it. I write your number after I've looked at the house.
It depends on what the work touches, so I check with the county for your job before we start. An older county list lets ordinary repairs go without a permit, but not work that cuts into walls or changes wiring, piping or mechanical equipment. When yours needs one, we file it, and you can check its status on the county's permit portal.
Clear a path to the attic hatch and move anything stored under it or up in the attic, because the crew needs room and the hose has to reach every corner. Keep pets shut in another room, and tell me about any roof leak you know of so it gets fixed first.
Most of the time goes into the prep, the removal and the air sealing, rather than the insulation itself. A clean attic that needs a top-up is the quickest job, and one that needs old material hauled out and a lot of gaps sealed takes longer. I'll tell you what to expect after I've looked.
For spray foam, yes, you, the kids and the pets stay out until the re-entry time, the wait before it's safe to come back in, which the foam maker sets for its product. I'll tell you that time before we start. With blown-in loose fill, you can usually stay home and keep clear of the work area.
Our phone, (530) 399-1513, is open seven days a week from 8 AM to 9 PM, or you can send the contact form any time and tell me what you're noticing in your Magalia home.